Quiltingboard Forums

Quiltingboard Forums (https://www.quiltingboard.com/)
-   Pictures (https://www.quiltingboard.com/pictures-f5/)
-   -   Geez...90"X90" is kinda big...who knew?!? Also need suggestions. (https://www.quiltingboard.com/pictures-f5/geez-90%22x90%22-kinda-big-who-knew-also-need-suggestions-t15597.html)

Zoo 01-19-2009 05:10 PM

2 Attachment(s)
So below is a pic of the quilt top I just finished for our guest bedroom.
Sorry that photos aren't great. The colours are way off, (the background colour's a red print- not pink!) becasue of it's size I had to take the pix in our dinning room and the lighting's not great at night.

Anyhow, the reality of a 90"X90" is a bit daunting...scratch that, it's alot daunting! :shock: Anybody have any experience quilting somthing this large on a domestic machine? Diane Gaudynski says it can be done but...... :shock:

Also the first pic is a close up of the center pannel, I can't decide how to quilt any of the 3. The little bubble looking things on the pannels are actually flowers, so I was thinking I could do little french knots in the middle of them? Or I could do a stipple design around the cranes and trees on the background? Or both?
Any suggestions?
Zoo

sharon b 01-19-2009 05:15 PM

No suggestions, but it is VERY PRETTY ! Love the colors .Just wanted to let you know how much I liked the quilt !
Sharon

sewnsewer2 01-19-2009 05:23 PM

Very pretty. How about a meander?

Shemjo 01-19-2009 05:43 PM

It is lovely,but since I am a hand quilter, I have no idea what to do about machine quilting something. :?

Elizabeth A. 01-19-2009 06:01 PM

I have machine quilted 107"x106" in a sewing machine with a 6.75" throat. :) (and many others mostly in the 85"-90" square size), what sort of information are you looking for?

1. You need to make sure you have the quilt supported so it wont pull on the machine. A table or at least a chair for the quilt to sit on will help wonders.

2. BASTE, BASTE, BASTE, the better you have your layers basted the less chance you will have of puckering. I perfer batting from the Warm company as it bastes well and quilts nicely. I have used poly - that was the one and only quilt I've done that ended up having puckers, if that tells you anything.

3. Firgure out how you'd like to quilt it, and plan a course of action, and then go for it.

4. Try to make sure as you move the quilt around that the quilt doesn't end up "doubled" back on itself in the arm area. I know some tv shows swear by "rolling the quilt, but I've found that with the styles I pick to quilt it's easier to stick it in and go with it. :D

Some people like a walking foot, I personally don't use one, I quilt just like I sew. I have used a quilting guide, which is a bar of shots that follows along your line to provide a nice offset, that works well.

And last but never least is you want to free motion it talk to Izy because she did one your size in two days.

mary quite contrary 01-19-2009 06:01 PM

I've done it so it can be done. Kind of like eating an elephant. One bite at a time.

Elizabeth A. 01-19-2009 06:06 PM

Here is Izy's post about free motioning an 85" x 95" in two afternoons. http://www.quiltingboard.com/posts/list/13771.page

pocoellie 01-19-2009 06:30 PM

It will be very pretty when you get it done, sorry I don't have any suggestions about quilting it. I understand that the spray basting works pretty good though.

Shelley 01-19-2009 08:11 PM

I did a king. Once. Then NEVER again!!! I started using a longarmer after that and never looked back.

I am slightly biased, however....

Good luck! Elizabeth gave you good advice!

ania755 01-19-2009 08:52 PM

very nice....and Good luck...


All times are GMT -8. The time now is 11:34 PM.