Quiltingboard Forums

Quiltingboard Forums (https://www.quiltingboard.com/)
-   Main (https://www.quiltingboard.com/main-f1/)
-   -   Help with tension please (https://www.quiltingboard.com/main-f1/help-tension-please-t211455.html)

Craftygirl 01-19-2013 08:35 PM
Help with tension please
 
I wonder if one of you clever ladies could help me with the tension problem I am having with my Janome Meory Craft 4000. I have had to set the tension to "9" which is the tightest it will go and also put gauze around my spool of thread. Wthout this my bobbin thread will just pull out with the slightest tug. I have had the machine for quite some years now and it has never given me a minutes trouble till now. I do hope someone has a clue for me as the cost of a service is out of my price range at the moment. I do keep the machine nice and clean.

Scissor Queen 01-19-2013 09:14 PM
Originally Posted by Craftygirl (Post 5798572)
I wonder if one of you clever ladies could help me with the tension problem I am having with my Janome Meory Craft 4000. I have had to set the tension to "9" which is the tightest it will go and also put gauze around my spool of thread. Wthout this my bobbin thread will just pull out with the slightest tug. I have had the machine for quite some years now and it has never given me a minutes trouble till now. I do hope someone has a clue for me as the cost of a service is out of my price range at the moment. I do keep the machine nice and clean.
It sounds like you may not have the bobbin thread threaded right. It may also be that the bobbin isn't wound right. Try a different bobbin.

Craftygirl 01-19-2013 09:24 PM
Thank you, I'll go try that right now.

Craftygirl 01-19-2013 09:43 PM
Unfortunately that didn't do the trick. I tried a couple of bobbins and rewound one as well. All seems to be fitting as usual. Gave the whole thing another good clean.

Tartan 01-19-2013 09:49 PM
Is there a piece of thread stuck in the tension discs? It might be the spool of thread, try a different one and see if that helps. With the bobbin thread being able to be pulled right out, it seems like the top thread is being pulled to the back. Is there too much tension in your bobbin? Can the bobbin case be adjusted? On my Bernina there is a tiny screw and it goes tighty righty or lefty lousy.

Craftygirl 01-19-2013 10:05 PM
THANK YOU SO MUCH. This seems to have fixed it. There were two tiny screws on the bobbin case and I loosened them both by half a turn. Tried the tension back on "auto" and away we go. I so appreciate your help.


All times are GMT -8. The time now is 07:14 PM.