Getting Straight in 2013
12-25-2012, 11:05 PM
#11
Super Member
Join Date: Jun 2010
Location: England Alton Towers
Posts: 6,673
Do you have the problem we have in my quilt group with flat/ flower head pins? That is the heads come off. We try to buy the yellow ones only which are stronger. I gave H my friend a needle, yes you've guessed after five minutes or more trying to thread it she discovered it was a missing head pin. Hohoho.
I would love to know where pins run off to as well. I am always buying more.
I would love to know where pins run off to as well. I am always buying more.
12-26-2012, 05:37 AM
#13
Power Poster
Join Date: Dec 2010
Location: Michigan
Posts: 11,276
I'm trying to get in the habit. I've been sewing for 50+ years and for some reason if I grab a bent or dull pin, I put it back in the pincushion. That is high on the list of stupid things I do!
good idea... i need to go through my pins, too. doubt that it will help my quilting though
12-27-2012, 04:21 AM
#15
Super Member
Join Date: Dec 2009
Location: Somewhere in Time
Posts: 2,697
My local WalMarts actually sells these. Sometimes I use a 50% coupon and order them from JoAnn's. I love these straight pins and have been using them for over 30 years. Some of mine are actually that old.
12-27-2012, 02:43 PM
#17
Member
Join Date: Apr 2011
Location: Southern Minnesota
Posts: 67
I, too, was in the market for pins. I searched high and low for 1 3/8 " for a long time. I finally found glass ones that I love. I previously purchased longer pins so I knew they would be perfect. Both sets of glass-headed pins were by Clover - my favorite notions and needle (knitting, that is) company.
12-27-2012, 06:25 PM
#19
Super Member
Join Date: Feb 2011
Location: Temporarily living in CT...missing AZ!!!
Posts: 1,747
The best pins for piecing are very fine pins, because they cause minimal or no distortion. I like pins made by Clover which are .4 thick and have clear blue and yellow (in the same pkg) glass heads. Clover also makes identical pins in the .5 thickness, which is thicker, and the size commonly called "thin" by most manufacturers. Don't buy .5---buy .4 thickness. I have to buy them at quilt shows because they aren't sold locally. The closest I can get locally are flower head pins which are light blue on one side and dark blue on the other side and are .45 thick. I'll use those in a pinch, but prefer the thinner .4 thick pins. They are so fine I sew right over them---slowly---and have never broken either a pin or a needle. If you sew slowly, the needle seldom hits a pin, and if it does, it usually will just push the pin a bit. On the rare occasion that the needle does hit a pin, the pin is so fine that it just gets bent. These pins are so thin I have to remember to be gentle in placing them or they will bend slightly. They're the best!
Thread
Thread Starter
Forum
Replies
Last Post
bearisgray
Main
25
07-21-2019 03:19 PM
Fraew
Main
559
12-20-2013 10:07 AM
Mariposa
Member Swaps and Round/Row Robins
160
05-28-2013 12:11 PM
