AAARRRGGGGGG!!!!!
07-28-2010, 08:07 AM
#31
Super Member
Join Date: Jan 2010
Location: southern Ca
Posts: 1,154
The no-bind method is commonly called "birthing" a quilt. This is a quick method used to finish smaller quilts. In this method, the quilt is "finished" before it is quilted. When layering the quilt, instead of placing the top right side up, you place the top right side down, so that it is facing the batting. You also place the backing so that it is facing the batting. You then sew 1/4" around the perimeter of the quilt, beginning at the bottom. Be sure to leave an opening large enough for your hand to fit. It is important to note that you cannot use a fusible batting for this method!
07-28-2010, 08:17 AM
#34
Super Member
Join Date: Jun 2010
Location: Michigan
Posts: 3,601
Originally Posted by Jim's Gem
I am trying so hard to get a couple of Downy quilts done and out the door.
They like the binding to be machine sewn and recommend using the backing to bring around and bind with.
I can't do this!!!!!
The first one, I was so careful when squaring up the quilt but ended cutting the binding part of the back on the last little cut. So I trimmed it all up, cut binding strips, adding more fabric from my stash and then sewed them on. I kept telling myself to sew it on the back first then turn to the front to sew down. Of course I attached it to the front, figured out I blew it after sewing about 15". I finished off as it was then pressed and turned toward the back, pinned the whole blasted thing and used a decorative stitch from the front to sew down. Looks fine but now how I wanted to do it.
Now, the second one, I was extremely careful squaring up the quilt and not cutting the back. I even taped the back away from the edges. I was just going back around to trim the backing to an inch larger than the rest, got to the last corner and trimmed it even with the quilt!!!!~! I am so mad at myself. I think I am going to try and do the backing/bind on 3/4 of the quilt and then just cut some binding strips for the top (which is the side I screwed up on))
How on earth do you do this type of binding without cutting the stupid backing fabric????
I have made so many quilts but have always used a separate binding which I would sew on the front and hand sew on the backing.
All I have to do is relax for one second and I mess the whole thing up!!!!!! This is so frustrating!!!!
They like the binding to be machine sewn and recommend using the backing to bring around and bind with.
I can't do this!!!!!
The first one, I was so careful when squaring up the quilt but ended cutting the binding part of the back on the last little cut. So I trimmed it all up, cut binding strips, adding more fabric from my stash and then sewed them on. I kept telling myself to sew it on the back first then turn to the front to sew down. Of course I attached it to the front, figured out I blew it after sewing about 15". I finished off as it was then pressed and turned toward the back, pinned the whole blasted thing and used a decorative stitch from the front to sew down. Looks fine but now how I wanted to do it.
Now, the second one, I was extremely careful squaring up the quilt and not cutting the back. I even taped the back away from the edges. I was just going back around to trim the backing to an inch larger than the rest, got to the last corner and trimmed it even with the quilt!!!!~! I am so mad at myself. I think I am going to try and do the backing/bind on 3/4 of the quilt and then just cut some binding strips for the top (which is the side I screwed up on))
How on earth do you do this type of binding without cutting the stupid backing fabric????
I have made so many quilts but have always used a separate binding which I would sew on the front and hand sew on the backing.
All I have to do is relax for one second and I mess the whole thing up!!!!!! This is so frustrating!!!!
07-28-2010, 08:42 AM
#35
Moderator
Thread Starter
Join Date: Jun 2008
Location: Camarillo, California
Posts: 35,242
A Downy quilt is one that is sponsored by Downy Fabric Softener. They send out requested kits to make quilts for hospitalized children. They ask that you also include one from your own stash to return with the kitted one. There is a link to request the kits, though I am at work and can't really take the time to find it right now!
I have sent in 3 already, though I binded them as I usually do except I machine sewed instead of hand sewed. I was just trying to do the other technique.
I hope to get this one done tonight, find where I put the label and get them out the door hopefully by Friday.
I have sent in 3 already, though I binded them as I usually do except I machine sewed instead of hand sewed. I was just trying to do the other technique.
I hope to get this one done tonight, find where I put the label and get them out the door hopefully by Friday.
07-28-2010, 10:42 AM
#38
Junior Member
Join Date: Mar 2010
Location: Cumming GA (formerly, NJ)
Posts: 162
Originally Posted by jetnica
I do mine "envelope style". Baste front to batting (I use pins) place front/batting right side together with backing. Sew all around leaving a gap to turn right side out. (much like sewing lining in purses). Turn right side out. Sew around edge again to keep everything in place. Quilt as desired.
07-28-2010, 11:14 AM
#40
Super Member
Join Date: Jun 2010
Location: Michigan
Posts: 3,601
Originally Posted by Jim's Gem
A Downy quilt is one that is sponsored by Downy Fabric Softener. They send out requested kits to make quilts for hospitalized children. They ask that you also include one from your own stash to return with the kitted one. There is a link to request the kits, though I am at work and can't really take the time to find it right now!
I have sent in 3 already, though I binded them as I usually do except I machine sewed instead of hand sewed. I was just trying to do the other technique.
I hope to get this one done tonight, find where I put the label and get them out the door hopefully by Friday.
I have sent in 3 already, though I binded them as I usually do except I machine sewed instead of hand sewed. I was just trying to do the other technique.
I hope to get this one done tonight, find where I put the label and get them out the door hopefully by Friday.
