Go Back  Quiltingboard Forums >
  • Main
  • Sewing Seams Pressed to the Side >
  • Sewing Seams Pressed to the Side

  • Sewing Seams Pressed to the Side

    Thread Tools
     
    Old 08-03-2018, 10:48 AM
      #1  
    Junior Member
    Thread Starter
     
    Join Date: Jun 2011
    Location: Sacramento
    Posts: 100
    Default Sewing Seams Pressed to the Side

    I usually press seams open to avoid this, but sometimes you need to press seams to the side. What do you do when those seams are all facing the same way? In other words, they do not butt together. Do you twist the seam so it nestles together? Or, are there other solutions to the problem?
    Rivercity is offline  
    Old 08-03-2018, 11:52 AM
      #2  
    Power Poster
     
    Jingle's Avatar
     
    Join Date: Dec 2009
    Location: Outside St. Louis
    Posts: 38,250
    Default

    If I am sewing rows together, I use a pin to let me know which way to press them so they will nest.
    Jingle is offline  
    Old 08-03-2018, 12:19 PM
      #3  
    Power Poster
     
    dunster's Avatar
     
    Join Date: Mar 2009
    Location: Lake Elsinore, CA
    Posts: 15,562
    Default

    If I can plan ahead so that the seams nest then I do so, but often that isn't possible (or I forget). I have no problem letting a seam allowance flip direction in the middle of a seam if that makes the points easier to match. I hesitate to clip into a seam allowance to flip it though.
    dunster is offline  
    Old 08-03-2018, 12:22 PM
      #4  
    Super Member
     
    Join Date: Jan 2012
    Posts: 4,783
    Default

    Sometimes when that happens I'll reverse the direction of one of the seams if possible, or let it switch directions as it wants to in the center, or press those seams open before sewing, which gets half the seam out of the pile up.
    JustAbitCrazy is offline  
    Old 08-03-2018, 01:02 PM
      #5  
    Super Member
     
    Macybaby's Avatar
     
    Join Date: Jul 2013
    Location: Georgia
    Posts: 8,258
    Default

    I clip the seam and flip it to nest. I figure I'd been clipping seams as per instructions on garments for years without problems, so it should work with quilts. If it's a light/dark, then I do it so the bulk of the seam is to the dark side.
    Macybaby is offline  
    Old 08-03-2018, 03:37 PM
      #6  
    Super Member
     
    Join Date: Apr 2016
    Location: Blue Ridge Mountians
    Posts: 7,075
    Default

    Originally Posted by dunster
    If I can plan ahead so that the seams nest then I do so, but often that isn't possible (or I forget). I have no problem letting a seam allowance flip direction in the middle of a seam if that makes the points easier to match. I hesitate to clip into a seam allowance to flip it though.
    ditto for me...................
    Jane Quilter is offline  
    Old 08-04-2018, 05:06 AM
      #7  
    Senior Member
     
    Join Date: Feb 2011
    Location: Grass Lake, MI and Bradenton, FL
    Posts: 785
    Default

    Originally Posted by Macybaby
    I clip the seam and flip it to nest. I figure I'd been clipping seams as per instructions on garments for years without problems, so it should work with quilts. If it's a light/dark, then I do it so the bulk of the seam is to the dark side.
    . I too clip the seam as a last resort, but I've heard that it's not advisable. I don't know why. What is the harm in doing this?
    janjanq is offline  
    Old 08-04-2018, 05:39 AM
      #8  
    Super Member
     
    Join Date: Jul 2010
    Posts: 6,430
    Default

    Just a guess, but it could weaken the seam. I have had to do it sometimes, but not as a usual behavior.
    carolynjo is offline  
    Old 08-04-2018, 06:53 AM
      #9  
    Super Member
     
    Macybaby's Avatar
     
    Join Date: Jul 2013
    Location: Georgia
    Posts: 8,258
    Default

    I figure if it works for clothing where the seam is going to be getting a lot more stress and rubbing,(like armholes, crotch seams. . .) it should be fine in a quilt that once you bind and quilt it, there is going to be way less stress on that seam. Yes, it may "weaken" it, but I doubt anyone has done any testing to quantify the difference.

    I do this a lot with my very small pieced blocks. Unless I'm not careful and snip the seam, I've never had it be an issue.

    However I do try to plan and press seams so I don't need to do this, but sometimes with the small blocks, it's not possible if you want to avoid a big bump of seams coming together.
    Macybaby is offline  
    Old 08-04-2018, 07:59 AM
      #10  
    Super Member
     
    Join Date: Mar 2010
    Location: Ridgefield WA
    Posts: 7,765
    Default

    ditto for me, too.
    Kitsie is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    mary123
    Main
    19
    10-19-2016 06:14 PM
    annesthreads
    Main
    41
    06-10-2014 04:04 PM
    teddysmom
    Main
    3
    10-01-2012 08:02 AM
    peacequiltingnana
    Main
    29
    07-10-2011 09:57 AM
    pittsburgpam
    Pictures
    20
    03-14-2010 08:11 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter