Go Back  Quiltingboard Forums >
  • Main
  • What I learned about needles for your hand quilters out there >
  • What I learned about needles for your hand quilters out there

  • What I learned about needles for your hand quilters out there

    Thread Tools
     
    Old 02-05-2011, 05:03 PM
      #51  
    Super Member
     
    Join Date: Aug 2009
    Location: Martinsville, Indiana
    Posts: 1,430
    Default

    OK everyone, now that you have your needle threaded and the other end nearest the spool knotted, slip your needle in the middle of the thread of the tail closes to the needle, about 1-2 inches away from the end of that tail. Sometimes it takes a while to do this the thinner the thread is, but keep trying. Then pull it through and the thread will be kind of knotted at the needle. It is knotted enough to keep the needle from becoming un-threaded most of the time, but still will go through the fabric. Try it and see. To take the thread off the needle, just pull that little tail and it will come off the needle. I ALWAYS do this with all of my needles and don't lose any in the pincushion. A threaded needle is always easier to find than one that is not.
    Janis
    Is everyone scurrying to get a needle and thread and try this? :)
    Janis is offline  
    Old 02-05-2011, 05:41 PM
      #52  
    Junior Member
     
    Flapper's Avatar
     
    Join Date: Nov 2010
    Location: Cntrl La
    Posts: 119
    Default

    Did not know this, but I will try it, hate it when my needles comes unthreaded during stitching!
    Flapper is offline  
    Old 02-05-2011, 06:13 PM
      #53  
    Super Member
     
    JUNEC's Avatar
     
    Join Date: Jan 2010
    Location: Clearwater, FL
    Posts: 2,328
    Default

    Originally Posted by Hinterland
    Another trick is to wet the needle eye - it wicks the thread through.
    How interesting, I usually wet the thread - Will have to try wetting the needle itself
    JUNEC is offline  
    Old 02-05-2011, 06:42 PM
      #54  
    Junior Member
     
    Betty K's Avatar
     
    Join Date: Jun 2009
    Location: north TX
    Posts: 100
    Default

    If you look at the eye of the needle, the edges of the right side of the eye are slightly flared out. The other side has straight edges making it tighter to thread.
    Betty K is offline  
    Old 02-05-2011, 07:29 PM
      #55  
    Senior Member
     
    Anna.425's Avatar
     
    Join Date: Jan 2011
    Location: Bellevue, WA
    Posts: 735
    Default

    Great tip. Once I put my glasses on I am usually okay however I will remember this. LOL
    Anna.425 is offline  
    Old 02-05-2011, 08:26 PM
      #56  
    Junior Member
     
    Campbell34's Avatar
     
    Join Date: Sep 2009
    Location: Lake Havasu City Az
    Posts: 196
    Default

    I learned along time ago too that you thread the needle as it comes off the spool , do not cut a piece and thread from other end of the cutoff piece , it is because of the way thread is made or wound :thumbup:
    Campbell34 is offline  
    Old 02-05-2011, 08:53 PM
      #57  
    Super Member
     
    Join Date: Oct 2010
    Location: Farmington Hills, Michigan
    Posts: 5,626
    Default

    Great tip. who knew?
    jojosnana is offline  
    Old 02-05-2011, 09:00 PM
      #58  
    Super Member
     
    Lyncat's Avatar
     
    Join Date: May 2010
    Location: Sun City West, AZ
    Posts: 1,269
    Default

    My MIL gave me some old needle packages. The other day I used one to stitch something up, and I couldn't believe how nice it was. Way better than any newer ones I've used. I'll be looking for more vintage needles!
    Lyncat is offline  
    Old 02-05-2011, 10:11 PM
      #59  
    Senior Member
     
    Join Date: Nov 2009
    Location: Texas
    Posts: 607
    Default

    Did you know that there is a right way and right way of thread also. I learned in EGA years ago that if you are hand sewing and your thread tends to curl or get knots rethread it the other end and it will stop. We were told that thread made in Europe arrives here on huge cones and is rewound onto spools and is often wound onto the spools where it comes off the wrong way. Wouldn't have believed it but it works. I can't look at it and tell right from wrong but some swear they can.
    martha jo is offline  
    Old 02-05-2011, 10:43 PM
      #60  
    Super Member
     
    Pickles's Avatar
     
    Join Date: Jan 2007
    Location: Texas
    Posts: 3,440
    Default

    Great Tips thanks to everyone for sharing your tips :-D
    Pickles is offline  
    Related Topics
    Thread
    Thread Starter
    Forum
    Replies
    Last Post
    emt2004
    Main
    61
    06-17-2012 07:28 PM
    TeeGee
    For Vintage & Antique Machine Enthusiasts
    23
    05-21-2012 09:03 AM
    pkary
    Main
    81
    01-25-2011 06:50 PM

    Posting Rules
    You may not post new threads
    You may not post replies
    You may not post attachments
    You may not edit your posts

    BB code is On
    Smilies are On
    [IMG] code is On
    HTML code is On
    Trackbacks are Off
    Pingbacks are Off
    Refbacks are Off



    FREE Quilting Newsletter